Hendlex ® - Ceramic Shield NC9 Nano 9H Car Body Paint Protection Ceramic Coating 40 ml (NC001)

HENDLEX Car Body Ceramic Shield NC9 is especially sturdy durable Nano ceramic protective coating designed for cars and motorcycles. This coating can be applied on painted and varnished surfaces, plastics or metals. This nano ceramic is 9H hardness and long lasting protective coating for the car body.

Features:

• Enhances the hardness of the surface by creating additional protection against minor scratches.
• Smoothens minor scratches and removes the holograms.
• Provides the surface with very strong hydrophobic properties and with the “easy cleaning effect”. The angle of a contact with water is more than 100 degrees therefore the surface remains clean for much longer period of time.
• Significantly highlights the color of paint and provides it with greater shine. Does not attract dust.
• Protects the surface from environmental impacts, such as acids, alkalis (resistant to pH2-pH13), road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion.
• The coating is resistant to changes of the temperature from -40 °C to 300 °C.
• Covered area: 40 ml will cover up to 8 m2 depending on surface (one mid-size car).

Specification:

• Application surfaces: Painted and varnished surfaces; plastics.
• Covered area: 40 ml for one middle size car.
• Durability: 1-2 years depending on weathering conditions.
• Thermal Resistance: - 30°C to 150 °C.
• Chemical resistance: 2< Ph < 13
• Coating thickness: 700 - 1000 nm.
• Hardness: 9H pencil.
• Water contact angle: 110° degrees.
• Coating properties: Water and dirt repellency, scratch ressistance.
• Application temperature: + 10°C to + 25°C (recommended + 20°C).
• Curing period: 12 hour pre, 3 days final.
• Storage conditions: + 5°C to + 30°C.
• Shelf life: 1 year.
• Packaging: 40 ml, 200 ml aluminum bottles; 500 ml plastic bottles. Packed using protective gas.
• Box Content:
  • Hendlex Ceramic Shield NC9 (40 ml).
  • Microfiber Cloth x2
  • Microfiber Applicator.
  • Non woven fabric cloth.
  • Protective Gloves.
  • Instruction.
  • Metal box.

Application:

Surface preparation. If car is waxed, remove wax with HENDLEX Wax Remover. Wash the car carefully and make sure there are no washing products (shampoo, dirt solvent) left on the surface. For better result it is recommended to coat polished car surface. After polishing make sure to wash the car. It is recommended to remove the remaining water using the compressed air jet. It is also recommended to remove dirt, oil and fingerprints with HENDLEX Paint Prepare.

Usage.Do not apply the coating in direct sunlight. Proper temperature for coating is from +10 °C to +25 °C. While coating, use the nitrile gloves that are in the set. Hold the applicator by the solid part. Put the application cloth onto the soft part of the applicator (non-woven fiber cloth). Open the bottle and wet the application cloth in different spots. Cover the surface evenly; make sure that you did not leave uncovered spots. It is recommended to cover the area of 80x80 cm at the time. If the temperature is higher than 25 °C, cover the smaller area. Cover no more than 1 m2 with one non woven fiber cloth. The surface must be polished in 20 seconds after coverage because it hardens very quickly. If the surface gets into contact with water, immediately clean it and repeat the coating process.
Continue coating areas up to 80x80cm until the full surface of the car is covered. After covering each area, polish it again with micro fiber cloth and make sure there are no unpolished spot left. If there is an unpolished spot and it does not get polished with any effort, use paint polishing paste or 2000 granular sandpaper. Cleaned area must be covered again.

Caution! It is recommended to keep the surface in higher than 18 °C temperature for 24 hours and prevent it from getting into contact with water. Depending on the temperature of the environment, the coating fully hardens in 48-72 hours.

JSC “Baltic Nano Technologies” is a high- tech company, which creates and manufactures nanotechnology based surface protection products since 2013. The company introduced new innovative products HENDLEX to the market. These products are designed to protect various surfaces from destructive environmental impacts.